EnigmaProtector+EurekaLog makes "EP_CheckupIsEnigmaOk" result problem

Post here messages if you have any problems with working of Enigma Protector
Post Reply
MrDeveloper
Posts: 2
Joined: Sun Jul 04, 2021 8:55 am

EnigmaProtector+EurekaLog makes "EP_CheckupIsEnigmaOk" result problem

Post by MrDeveloper »

Hello Support

I have a problem with the latest Enigma Protect version 6.90 in combination also with the latest EurekaLog version 7.9.4.0 or lower under RAD Studio.

It is quite simple to reproduce:

1. create any VCL application (e.g. 64 bit)
2. include enigma_ide.pas
3. use some functions
4. use the function "EP_CheckupIsEnigmaOk"
5. activate EurekaLog with profile "VCL Forms applications"
5. compile project as executable
6. protect with Enigma Protector with random settings

If the project was successfully protected with Enigma Protector and EurekaLog is active according to the RAD Studio IDE profile and settings, the function "EP_CheckupIsEnigmaOk" suddenly always returns the value "FALSE", indicating that the application has been compromised. Even directly after the fresh protection run. I tried this with random combinations and it only seemed to work 1x randomly with EurekaLog. But it is more of a gamble. Do you guys have a quick solution here?

Thanks a lot for the quick reply and solution in advance!
Enigma
Site Admin
Posts: 2939
Joined: Wed Aug 20, 2008 2:24 pm

Re: EnigmaProtector+EurekaLog makes "EP_CheckupIsEnigmaOk" result problem

Post by Enigma »

Hi, that's possible to be true. EurekaLog may do some changes in memory to application code (or even to itself, but it's code is located in the same protected memory as application's code), so protection detects the changes and alerts on that.

We could investigate what exactly happens there, what is being changed in memory, what is causing protection to alert, but really doubt we can fix that, we can only find a reason of problem (or you can describe the situation to EurekaLog developers, maybe they give a workaround). If you wish that, please send us a simple example at support@enigmaprotector.com, we will check it out.
Enigma
Site Admin
Posts: 2939
Joined: Wed Aug 20, 2008 2:24 pm

Re: EnigmaProtector+EurekaLog makes "EP_CheckupIsEnigmaOk" result problem

Post by Enigma »

We have investigated the file, problem, as I expected, happens because EurekaLog patches the import directory in memory (it hooks one of the function in the protected module).
Since protection is protecting import table and redirect it on own code, EurekaLog patches/hooks the protection code. This protection alerts on integrity checking.
To avoid this issue, turn off option Protection Features - Import Protection - Emulate WinAPI functions.
Post Reply