always write to disk option causes the program to not run

x64 version issues
Post Reply
xiaoyun
Posts: 2
Joined: Fri Sep 24, 2021 2:49 am

always write to disk option causes the program to not run

Post by xiaoyun » Fri Sep 24, 2021 3:06 am

Image

I used The Enigma Protector x64 version 6.90 to set this option, which caused the program to fail to run, and the process was only displayed in the Task Manager. The file was not released to the hard disk, only a folder was created.

Enigma
Site Admin
Posts: 2732
Joined: Wed Aug 20, 2008 2:24 pm

Re: always write to disk option causes the program to not run

Post by Enigma » Fri Sep 24, 2021 2:00 pm

Hi, can you please send us your non protected program and .enigma64 project file (including files in Virtual Box) at support@enigmaprotector.com, we will try to check it out.

xiaoyun
Posts: 2
Joined: Fri Sep 24, 2021 2:49 am

Re: always write to disk option causes the program to not run

Post by xiaoyun » Fri Sep 24, 2021 2:51 pm

Create a new project directly, then add any file in the VIRTUAL BOX, set it to always write to the disk, and then you can view the problem after protection.

Image
Image

Enigma
Site Admin
Posts: 2732
Joined: Wed Aug 20, 2008 2:24 pm

Re: always write to disk option causes the program to not run

Post by Enigma » Tue Sep 28, 2021 3:27 pm

Hi, please contact support@enigmaprotector.com to get the fixed version.

Problem is confirmed and successfully fixed.

Post Reply