How to protect my program and get registration from User?

Post here any topics that related to Enigma Protector, its functionality, your misunderstanding, offers to improvements etc etc etc
Bigkang
Posts: 6
Joined: Fri May 31, 2013 7:30 pm

How to protect my program and get registration from User?

Post by Bigkang » Fri May 31, 2013 8:50 pm

How can I protect my program that can be accessed by many users, and each user will send different registration numbers to me, and I send them the code to to make my program operational.

Bigkang

Enigma
Site Admin
Posts: 2367
Joined: Wed Aug 20, 2008 2:24 pm

Re: How to protect my program and get registration from User

Post by Enigma » Sun Jun 02, 2013 12:03 pm

Hi Bigkang,

In the most common way you should use the following functions:
- Registration Features - Common - Allow Execution only if registered
- Registration Features - Registration Dialog.

Users will run the program, see this dialog, send you back Hardware ID. Based on this, you will generate a key and send it back to user.

See this video for more info: http://www.softwareprotection.info/2011 ... protector/

crackheadz
Posts: 4
Joined: Sun Jul 14, 2013 6:25 pm

Re: How to protect my program and get registration from User

Post by crackheadz » Wed Jul 31, 2013 6:58 pm

when i use the hardware id of user to generate a key, why it always says "hardware id is invalid""?

Enigma
Site Admin
Posts: 2367
Joined: Wed Aug 20, 2008 2:24 pm

Re: How to protect my program and get registration from User

Post by Enigma » Thu Aug 01, 2013 7:48 am

crackheadz wrote:when i use the hardware id of user to generate a key, why it always says "hardware id is invalid""?
This happens only if you've protected the file with one project file, but trying to generate a key with another project.

crackheadz
Posts: 4
Joined: Sun Jul 14, 2013 6:25 pm

Re: How to protect my program and get registration from User

Post by crackheadz » Thu Aug 01, 2013 8:46 am

Enigma wrote:
crackheadz wrote:when i use the hardware id of user to generate a key, why it always says "hardware id is invalid""?
This happens only if you've protected the file with one project file, but trying to generate a key with another project.
if the user sends his hardware id, how to generate a key for him? Do i have to generate the key using, Tools>Key Generator? or Tools>Export Key Generator? Do i have to edit again the unprotected exe or the protected one?

Enigma
Site Admin
Posts: 2367
Joined: Wed Aug 20, 2008 2:24 pm

Re: How to protect my program and get registration from User

Post by Enigma » Thu Aug 01, 2013 8:50 am

You have to open your .enigma project file in Enigma Protector and generate a key using Tools - Keys Generator. That's only a one way, you may also export keygen, use License Manager etc.

crackheadz
Posts: 4
Joined: Sun Jul 14, 2013 6:25 pm

Re: How to protect my program and get registration from User

Post by crackheadz » Thu Aug 01, 2013 8:53 am

Enigma wrote:You have to open your .enigma project file in Enigma Protector and generate a key using Tools - Keys Generator. That's only a one way, you may also export keygen, use License Manager etc.
thanks for the very fast reply, i'll try your suggestions. but my problem is, how can I add the hardware id of a user when generating a key, it always says "hardware id is invalid, when i put the hardware id in the key generator?

Enigma
Site Admin
Posts: 2367
Joined: Wed Aug 20, 2008 2:24 pm

Re: How to protect my program and get registration from User

Post by Enigma » Thu Aug 01, 2013 9:01 am

crackheadz wrote:"hardware id is invalid, when i put the hardware id in the key generator?
As I told, I think that you are using not same project file for protecting the file and for generating a key.

Make a new project, configure it, save it, protect the file, send file to client, ask to return you Hardware ID, open saved project file in Enigma Protector and generate a key. Using these recommendations you'll succeed.

crackheadz
Posts: 4
Joined: Sun Jul 14, 2013 6:25 pm

Re: How to protect my program and get registration from User

Post by crackheadz » Thu Aug 01, 2013 9:20 am

thank you soooooooooooooooooo muchhhhhhhhhhhhhhhhhhh!!!!! thanks for being patient.

aceventura2
Posts: 1
Joined: Wed Jul 25, 2018 7:09 am

Re: How to protect my program and get registration from User

Post by aceventura2 » Wed Jul 25, 2018 7:55 am

Hi dear Enigma,
I am trying to generate a new key for myself. Whenever I use Enigma Protector and use the Hardware ID which is auto-populated in the trial expired version exe file, it comes up with "hardware id invalid" for my own machine. How can I get that to work ? Also its gives and error "file is already protected" so what should I do. Thank you.

Post Reply